Do-it-yourself hats made from scrap materials: models, tips on making

Handmade hats made from scrap materials are the original accessory for a fancy dress, a holiday in kindergarten, a wedding ceremony, Halloween, a New Year's celebration. Indeed, at different times of the year, they are relevant and in demand in everyday life and in stage images.

How to make a hat from the material at hand?

Create such an addition to the side is not difficult. For a small hat you need:

  • a piece of felt of any color;
  • thick needle;
  • reel thread;
  • scissors;
  • marker;
  • crocheted lace or lace fabric;
  • beads;
  • hair band;
  • drill;
  • a small piece of the grid;
  • glue;
  • pen.

how to make a hat out of scrap materials

Step-by-step instructions for making a hat with your own hands from improvised material - felt:

  1. Take the source material and draw two circles, the diameter of which is respectively 3 cm and 7 cm (for a cap more, you will need to increase the size).
  2. Draw a rectangle with a length equal to the circumference of the small circle. It can be calculated as follows: 2x3,14x1,5. The width of the rectangle will be equal to the height of the cap.
  3. Fold the strip into a ring and sew the ends.
  4. Attach a small circle on top and sew.
  5. To attach a big circle to the cylinder from below, having located it strictly on the center.
  6. Sew lace or fabric around the cylinder.
  7. Beads decorate the bottom of the cap.
  8. Make two small holes in the hoop and sew it to the base of the product.
  9. Fold the net in half and pull the edges out.
  10. Attach the veil to the cap with stitches and insert the feather.

A wrap with a felt mini hat is ready.

Paper hat

Using simple techniques and unpretentious tools, you can create exclusive accessories for holidays at home, in kindergarten and school from a sheet of drawing paper. To make a paper hat, you will need:

  • watman paper;
  • pencil, ruler, compass;
  • glue;
  • tailoring meter;
  • finishing materials: flowers, braid, ribbons.

paper hat

Step-by-step instruction:

  1. Measure the girth of the head, let it be 56 cm, and the field - 14 cm.
  2. Cut a rectangle of paper 56 cm long and 12 cm wide (the height of the crown, if desired, may be different).Add on three sides (two lengths and width) for 1 cm for bonding. On two sides along the length make cuts on allowances and bend them.
  3. Draw two circles with a common center and radii: 56/2 x 3.14 = 8.9 cm you can take approximately 10 cm - the radius of the first circle. This is the top of the hat; 10 + 14 = 24 cm is the radius of the second circle.
  4. Cut the top of the hat.
  5. The rest is fields. To shape the cut small sector and make the valve in 1 cm, spread it with glue and press.
  6. Lubricate the inner edge of the fields with glue and attach to the crown. To glue the crown, if it turns out to be long, it is cut off.
  7. Glue the top of the hat to the crown. To do this, grease all the valves with glue and put a circle of smaller radius on them. Turn the hat over, press the valves and hold it for a while.

A hat made of paper is ready, it remains to decorate it. Here it is necessary to dream. In order to hide possible defects, glue the tape around the edges of the fields, the top and bottom parts of the crown. You can attach flowers or make a bow, decorate with sequins, paint patterns, tie ribbons. Use beads and beads is also appropriate.

Autumn hat

This headdress is suitable for the autumn holiday, which are often arranged at school.At this time, just a lot of fallen leaves and gather up the material is not difficult, you can even choose the desired color.

To make a leaf hat you will need:

  • scissors or pruner;
  • awl;
  • fresh autumn leaves.

leaf hat

The order of execution:

  1. Trim the tips of the stalks.
  2. Take two leaves and fold them in half.
  3. Stump one of them to pierce the other, how to sew one stitch.
  4. Spread the leaves in a circle, piercing each one up to the stem of the previous one.
  5. To decorate the top of the hat on the edge you need to make tucks, like on a fabric. For this, it is better to use an awl, as the layer of leaves turned out to be thick. Insert a small stalk into the hole. The stitch will require a second hole where another part of the stem is inserted. Their ends will be on the inside of the hat from the leaves. Got hat hat. Can this end.
  6. For the fields again continue to do punctures with stalks of leaves, folded them in half, as they began. So continue until you get the field of the desired size.

The hat is made bigger in size if it will not be used immediately. When drying it will decrease. It should be noted that the glue and clips in its manufacture are not needed.Leaves are attached only by stalks.

Preparation for making straw hats

One of the most exciting occupation of needlework is weaving from straw. This unique natural material has always been in the price of the masters. By its qualities it surpasses all synthetic. In the autumn, when the grain crops are already cleaned, straw remains in the fields. It is collected, sorted by length and diameter, dried. Before weaving the hat, the raw materials are soaked in water for 0.5 hours and wrapped in plastic. From it weave 25 meters of tape, which is called a catfish or chetyrekhvartskovku. Do it like this:

  1. Take two straws. One is placed horizontally (straw 2), and the other (straw 1) at an angle to it at 60 degrees.
  2. Bend around the first around the second.
  3. One end of the second bend to the left, and the other to the right and stick under the straw 1.
  4. The end of the straw 1, located on the right, bend to the left, and the other, which is to the left, bend to the right and slip under the straw 2.

Repeat weaving in the same sequence.

Straw hat

Straw ribbon woven, and you can proceed to making a hat with your own hands from the improvised material, which serves as a straw.

For further work will require:

  • sewing needle;
  • threads;
  • iron.

hats do it yourself from scrap materials

Instructions for steps:

  1. The finished tape twist into a roll.
  2. Bend its tail in the form of a triangle and put the next row under it.
  3. Rows sew thread. Thread the needle when stitching.
  4. Continue to perform in a circle, placing each row under the previous one and stitching.
  5. Bottom for an adult - 20 cm, and for a child - from 13 to 18 cm.
  6. Then every four rows of the sewn tape roll out with a rolling pin.
  7. Iron the finished crown with the hottest iron possible.
  8. Bend the tape in half width and lay out the first row of fields.
  9. Work to perform to the required width of the fields.

After finishing the work, iron and decorate the product at will: ribbons, flowers, beads.

Conclusion

Handmade hats are always relevant. They are in great demand at any children's parties. Each costume requires a specific headgear. You can not always buy what you need.

Related news

Do-it-yourself hats made from scrap materials: models, tips on making image, picture, imagery


Do-it-yourself hats made from scrap materials: models, tips on making 15


Do-it-yourself hats made from scrap materials: models, tips on making 17


Do-it-yourself hats made from scrap materials: models, tips on making 72


Do-it-yourself hats made from scrap materials: models, tips on making 27


Do-it-yourself hats made from scrap materials: models, tips on making 100


Do-it-yourself hats made from scrap materials: models, tips on making 77


Do-it-yourself hats made from scrap materials: models, tips on making 29


Do-it-yourself hats made from scrap materials: models, tips on making 47


Do-it-yourself hats made from scrap materials: models, tips on making 89