How to install a plastic window with your own hands?
Windows of plastic instantly likedconsumers immediately after their entry into the market. At present, practically no one has established their classical wooden analogues. The advantage of them is that they can be mounted not only by a professional with experience. After reading our article, you will learn how to properly install a plastic window. So, let's get started.
When installing such insulating glass units, the following nuances are possible:
- You can install them even in winter. However, you yourself should understand that it is best to work in the warm season. In addition, in summer and in spring the mounting foam hardens better. Since it is correct to install a plastic windowyou need all the instructions, this process can take more than one day: to live in a windswept apartment will not be too comfortable.
- The need for accurate measurements of window openings. The success of the measure depends on the success of the whole event.
If you want to install plastic windows cheaply(independently) in the panel house, then the internal opening should also be measured. The fact is that in such cases, the box with frames is held in the opening, the section of which resembles the letter "G". The measurements are carried out according to the following instructions:
- measure the distance between the side slopes;
- Measure the distance from the sill to the slope on both sides;
- note that the width of the window sill should be equal to the width of the wall, except for the width of the profile.
Before installing the plasticwindow in a brick house, it is necessary to define a bearing wall, since it usually contains a thick layer of plaster. This should be taken into account when measuring window openings.
It is believed that it is easiest to installdouble-glazed windows in a wooden house, however it is not. Please note that wood is a capricious material, easily expanded and compressed by environmental factors. That's why you need to install windows on the window. This is an independent design of the bar, similar to the binding of the door frame. Thanks to her, the window does not jam and deform due to the "movements" of the tree.
Once again, since it is difficult to install a plastic window correctly, it is necessary to follow the instructions carefully.
- Having pulled out plugs, to pull out double-glazed windows.
- Mark each of them so as not to confuse it with the installation.
- Remove the protective film from the ends, pasting a paper tape or other similar coating on its place.
- On the end of the plastic frame, glue the vapor barrier film.
- Installing the bearing pads in the opening, put the assembled window on them.
- Carefully adjust it using the building level.
- Finally fix the box with the help of metal profiles and fill the cavities with quality foam.
- Install the windowsill, low tide, and after the installation of insulating glass. Mount the plugs you need to start from the top.
- Install internal slopes, fix the decorative profile.
If you are sure to comply with all our instructions, then install plastic windows (Moscow with their assortment will amaze anyone) can quickly and efficiently.