Injector cleaners: which one is better. Injector cleaner: expert reviews
In the early 80s, injection systems began to be massively installed on cars. The injector is the injection of the fuel-air mixture using a nozzle into the cylinder. Compared to the carburetor, the system is more efficient and reliable. Nevertheless, poor-quality fuel and long-term maintenance without maintenance leads to the fact that the injectors are covered with soot, and the whole system as a whole, too. We will talk about what is better injector cleaner, and when it should be used, and most importantly, how to do it correctly and without harm to the car.
Briefly about the system
The main fuel supply element in the injector system is the injectors. If they are without carbon, then spraying is carried out by a cone and at a certain angle. In addition, a certain amount of micro droplets of the fuel-air mixture is observed.
The formation of soot and plaque, unfortunately, is inevitable. Firstly, it appears due to the fact that the injectors operate at high temperatures. In the area of the nozzle appears carbon. This leads to a change in the spray angle, as well as the size of the micro droplets of the fuel mixture. In the most neglected cases, the nozzles feed the mixture into the combustion chamber with a jet. This immediately affects the operation of the internal combustion engine as follows:
- increased fuel consumption;
- problems with the launch of the engine;
- deterioration of dynamic performance;
- unstable operation of the power unit at idle.
But this problem is solved with the help of special tools. Let's see which is better to choose the injector cleaner, and what are the nuances.
Browse popular models
If you do not know which is better injector cleaner, then pay attention to the RVS-Master. These are products of a Finnish company that has recommended itself very well. In the Russian market, this is one of the most popular means to eliminate problems with injectors.
It is worth noting that the tool RVS more neutral to rubber seals and glands, so it can be safely used on engines with high mileage.Not only the injectors are cleaned, but the piston rings as well as the spark plugs, which is also important. Judging by consumer reviews, the tool is very effective. Therefore, if we say which is the best injector cleaner of a budget class, then definitely RVS.
Which injector cleaner is better: reviews about "Likvi Moli"
The German company supplies just a huge amount of various tools for cars, ranging from shampoos and ending with injectors cleaners. The latter interest us especially. At the moment there are three types of cleaners:
- Light - designed for preventive maintenance. Such a tool is most effective if the engine is new and the injectors are still clean. Well protects against the formation of soot for some time.
- Effective - copes with a serious touch. Suitable for systems that have not been cleaned for several years.
- High Performance - a means to deal with a serious patina, when the nozzles are practically not performing their immediate task.
As you can see, the injector cleaner may be quite different from "Likvi Moli". Which is better? It all depends on how running the system.After using High Performance, you can regularly use the version of "Light" for prevention.
Hi-Gear from America
Straight from the United States on our counters comes another very effective tool to combat the raid in the fuel system of the car. In fact, this is an analogue of "Liquidation Pray," though, judging by the multiple reviews, it is less effective in severe cases. However, for the injectors that have already been covered with a specific soot, but not yet very advanced, this American tool is perfect. That "High-Gear", that "Likvi Moli" are not cheap, and this should be taken into account. The advantages of this cleaner include the following: increases the dynamic performance of the engine, reduces fuel consumption, is not too aggressive to rubber products. In general, quite a popular tool in Russia, but there are more budget and equally effective means.
Which injector cleaner is better: expert reviews
In this case, we are talking about two domestic manufacturers. Each cleaner has long and very effectively used for the fuel systems of modern cars. "Vince" can not be poured into the tank, as the sediments collected in the fuel tank, fall into the engine and can clog the injectors.Such a tool is recommended to use only along with a special washing station. After several uses, the plaque is removed by 80%, which is quite good.
"Laurel" is also very acceptable. It is also not poured into the tank, and used flushing station. Judging by many reviews, it is the “Lavrom” that experts at the workshop use, since it is extremely effective. After use, advantages such as an increase in ICE compression, a decrease in the amount of harmful emissions into the atmosphere, etc. are noticed. In addition, the price of this tool is more than affordable, so it’s definitely worth a try.
Recommendations of specialists
We have already talked a little about which injector cleaner is better. Reviews of professionals in this case, it is desirable to take into account. Many employees of the service station recommend using only those tools that are poured into the tank on new cars. They are rather preventive and can keep the system clean for a long time.
Means intended for use in the most neglected cases should never be poured into the tank. This, ultimately, can completely kill the fuel system.It is best to contact the service, where the experts will do everything for you. But if there is a great desire, then you can cope on your own.
The liquid for dealing with carbon and deposits in the fuel system must be of high quality and proven. Buy it only from reliable sellers. Before use, carefully read the instructions. There is indicated the method of application and dosage, as well as regularity. All this will help you a lot.
Let's sum up
As you can see, sometimes it is worth using an injector cleaner in the tank. Which is better? Perfectly "Light" from "Likvi Pray" or the same "High-Gear". In advanced cases, this approach is useless. There will already need a full washing station, which is designed for this purpose.
Still, you can clean the injector in your garage. The flushing station can be replaced with a conventional compressor. But even here it is desirable to have at least some knowledge and skills. Therefore, before starting work, it is advisable to familiarize yourself with the main nuances and problems that may arise. But the most effective way to clean the injectors is to use ultrasound.True, it is quite expensive, but the result often exceeds all expectations. That's basically all that you can tell about the popular cleaners of injection systems of modern cars.